Today we are going to talk about the Wotofo Flux Kit designed by Rig Mod.
Wotofo Flux Kit Packaging
Inside the Wotofo Flux Kit package there is a Flux mod, a Flow Pro tank that holds four milliliters of juice, a 5ml bubble tank, some o-rings for your tank, a USB charge cable, a user manual for the Flow Pro tank and a user manual for the Flux kit, and a spare coil.
Wotofo Flow Pro Tank Details
The mesh coil is 0.18ohm and it’s rated between 40 and 60 watts. Many vapers may think that’s a really small wattage range and you won’t get much from it but this is not the case, you’re doing it a lot from this coil. The flow Pro sub tank is top filling. You grab the top and turn it clockwise and once you do that you’ll find that it just spins open. It’s bottom airflow and it’s got a nice resistance to it and it stays in place wherever you put it.
Wotofo Flux Mod Details
The Wotofo Flux mod comes in many different colors and it comes with a fire button, a screen, 4 setting buttons, holding dual 18650 battery. On the screen, you can see the information of the working mode, wattage, the working voltage, the coil resistance. The Flux mod can work under three working modes, Standard mode, Powerful mode and Powerful+ mode, with an output wattage range of 5-200w. In standby mode you can just leave the model one that’s flashing the multicolored LED up and down the center. But you can change it by pressing the fire button and the down button, you can change the mode and the color.
Wotofo Flux Kit Pros
1.You can get a lot of vapor with the Flow Pro sub tank, even at a low wattage
2.The Flux mod has a instant firing
Wotofo Flux Kit Cons
1.Difficult to see the screw clearly under the sun.
2.The Flux mod rattles a bit
3.Not very accurate wattage, a bit more powerful than the figure shows