Pulse 80w mod, a squonk mod by Tony B and Vandyvape was released a few months ago after all the drama between them and Voopoo. It features vandyvape chipset and it’s a great little BF mod for sure. At the beginning of August, the Pulse x kit was brought into our attention by Tony B. What’s special with the new Pulse x kit? Is it an upgrade version of the Pulse 80w mod? What are the differences between Pulse 80w mod and Pulse 80w kit? Most of us who cares about and uses the Pulse series products might have a lot of question in mind, then go through the article below, it’s about the comparison between Pulse 80w mod and Pulse x kit by Tony B & Vandyvape.
Apparently the most obvious difference between Pulse 80w and Pulse x kit is that the Pulse x kit includes a Pulse X RDA, which has got a quite interesting x post design and the squonk mechanism delivers eliquid on top of the coils, making it a new concept of squonking dripping. Put the Pulse x RDA alone, we have the following comparison table for the Pulse 80w BF mod and Pulse x BF mod.
| Contents | Pulse 80W BF Mod | Pulse x BF Mod |
| Size | 54*25.9*82mm | 56x28x82mm |
| Battery compatibility | Single 18650/20700 | Single 18650/20700/21700 |
| Liquid Capacity | 8ml | 8ml |
| Chipset | Vandy chip | Vandy chip |
| Output mode | VW/VV/TC/Bypass mode | TC/Bypass/Voltage mode |
| Wattage range | 5-80W | 5-90W |
| Output voltage | 0.5-8.5V | 0.5-8.5V |
| Resistance range | 0.05-3.0ohm(VW)/0.05-1.5ohm(TC) | 0.05-3.0ohm(VW)/0.05-1.5ohm(TC) |
| Temperature range | 200-600F/100-315C | 200-600F/100-315C |
| Protections | Overheating protection, overcurrent protection, short circuit protection, open circuit protection, overtime protection, low battery warning | Overheating protection, overcurrent protection, short circuit protection, open circuit protection, overtime protection, low battery warning |
| Panels | Resin/Carbon Fiber | G10/Frosted PC |
From the table above we can see that there’s not much difference between the Pulse 80w bf mod and Pulse x bf mod. And when it comes to structure construction, the Pulse 80w bf mod and the Pulse x bf mod are almost identical. If you already have the Pulse 80w mod and you’re happy with the item, there’s no need to buy the Pulse x kit, you can purchase the Pulse x RDA separately if you’re interested in the RDA. If you’re planning to buy a regulated squonk mod by Tony, you may think about the Pulse x kit. Welcome to comment below if you find more significant difference between the Pulse 80w mod and Pulse x kit.
