Posted on 1 Comment

Berserker MTL RDA | Best MTL RDA 2018?

Berserker MTL RDA - best mtl rda

Recently VandyVape has added a new product to their Berserker MTL line, it’s called the Berserker MTL RDA, designed by Alex from Vapersmd.

Berserker MTL RDA is a single coil RDA with same posts of Berserker MTL RTA. It has a very deep juice well, six airflow tubes and top fill feature. You can use the Berserker MTL RDA with squonk mods.

Berserker MTL RDA package

Inside the kit we have a Berserker MTL RDA, 22mm beauty ring, coil correction tool for more convenient coil installation, blue screwdriver, allen key for squonk pin installation, extra screws, an extra delrin drip tip, spare orings, airflow tubes, pre-made superfine fused clapton coil, and user manual.

Berserker MTL RDA specification

The Berserker MTL RDA is made from stainless steel and it’s available in four colors, silver, black, gold and rainbow. It’s compatible with 510 drip tips. The six swappable airflow tubes are made from heatproof plastic with different holes and diameters. You can change the airflow tube even when you have coil and cotton installed. The airflow can be adjusted by turning the barrel. The juice well is 12.8mm deep. Main diameter of the Berserker MTL RDA is 18mm, but in the kit we also have two decorative rings, 22mm and 24mm diameter.

Berserker MTL RDA details

On the top of the Berserker MTL RDA we have 510 drip tip with heat sink, the top part of which is removable by unscrewing counter Berserker MTL RDA build deckclockwise. Then you can easily swap it with delrin piece of drip tip that is included in the package. The drip tip has two orings around the bottom and inside it’s cone shaped, with bore diameter of 3mm. The top cap with knurling on it is convenient for removing and refilling eliquid. Inside the top cap it’s cone shaped as well, which is good for the flavor. You can install any 510 drip tips into the slot of the top cap. Then we have a perforated barrel with six airflow holes, 0.8mm, 1mm, 1,2mm, 1,4mm, 1.6mm and 2.0mm. By turning the barrel you can adjust the airflow. Between the barrel and the deck there are two orings that keep them in place. The build deck of the Berserker MTL RDA is the same construction as the Berserker MTL RTA and Berserker Mini MTL RTA, with special walls for convenient coil installation and Philip head screws. Do remember to install the coil and glow it before inserting the airflow tube, so as to prevent the plastic tubes from melting by the heat of glowing coils. You can also use the coil correction tool to lower the coil after installation.

The two big holes on the deck are for you to insert airflow tubes. On one side of the airflow tube there’s a hole for getting the air and on the other side there’s just blank plastic, and in the center there’s a hole for blowing air into the coil. There’re totally six airflow tubes for your choices. The smallest hole is 1.2mm, next is 1.4mm, then 1.6mm and 2mm. There’re also two airflow tubes with more than one hole, one with three 1mm little holes and another has three 0.5mm holes. You can install the airflow tube by simply pushing the tube inside the big holds of the Berserker MTL RDA build deck. There are a lot of options for you to adjust the airflow and you can experiment as much as you want. At the bottom of the Bersreker MTL RDA we have the Berserker MTL RDA, Alex from Vapersmd, and serial number engraved. The 510 pin on the bottom holds the positive post while the screw holds the negative post. The 510 pin is adjustable, so it’s hybrid safe. You can also replace the 510 pin with a squonk pin so that it can be used with squonk mods.

We also have two beauty rings in the kit, one is 22mm and another is 24mm. They’re pretty simple to use. Just put the ring on the bottom part of the Berserker MTL RDA and then screw the RDA onto a mod.

Final thoughts on the Berserker MTL RDA

Berserker MTL RDA works pretty well on MTL vape, both loose and tight draw. You can use the Berserker MTL RDA on a lot of vape mods including squonk mods as it comes with squonk pin, mechanical mods as it has an adjustable 510 pin, and ego style mods as it does not require high wattage. If you don’t use squonk mods, you can just take off the top cap and drip eliquid inside, the Berserker MTL RDA is able to hold around 1.2ml of ejuice. The airflow tube can be easily changed even when there’s coil and cotton installed in the deck. You get different experience, different draw and different flavor with different airflow tubes. If you’re an MTL vaper and looking for an MTL RDA, the Berserker MTL RDA can be your best choice. It’s one of the best MTL RDAs in the vape market now.

shop Berserker MTL RDA now

1 thought on “Berserker MTL RDA | Best MTL RDA 2018?

  1. Thanks, it is quite informative

Leave a Reply